Two-stage pump for max. productivity of demolition tools
Short cycle times thanks to low-pressure pump combined with high-pressure pump.

Connection option 230 V and 400 V with selector switch
Two plug connections provide full flexibility on the job site. Does not apply to EP2 110 V.

High quality motor
With extra large control box in which all capacitors are stowed.

Filtration integrated in tank
Intake, return, and filling filters ensure protection of the pump and unit for maximum lifetime.

Closed hydraulic system
All parts run in oil.

Manifold for up to 3 device connections
One coupling set low/high pressure mounted as standard – expandable to 3 sets.

Robust steel frame with wheels and extendable handle
Extendable handle and solid rubber wheels for easy relocation in the building or on the construction site.

Integrated storage box
Integrated storage box for accessories (tools, special lubricant, chain)

Lifting eyes
Mounted lifting eyes for 4-leg sling chain

Clad steel frame
New designed Metal housing for best protection under rough working conditions

EP3 230 V / 400 V – emission-free high pressure up to 500 bar

By combining the two most common electrical connection types 230 V and 400 V in one device, the EP3 offers maximum application possibilities. The type of connection used can be determined via a selector switch. The EP3 operates 100% emission-free and is therefore particularly suitable for indoor use.
Even the stricter future health and safety requirements for exhaust fumes and noise can be complied with. The EP3 is the reliable solution for all areas where conventional gasoline or diesel units are prohibited due to their exhaust emissions.

Our electrically driven high-pressure unit has two parallel overpressure protection systems. A two-stage pump enables rapid pressurisation of the connected tool and thus improves its productivity. Up to 3 tools can optionally be connected to the pre-assembled manifold and operated in parallel.

Integrated wheels and an extendable handlebar facilitate transport within the building. Suitable lifting eyes are located on the unit for uncomplicated crane transport using a “4-leg sling chain”. In addition to the compactness of the unit, the clad steel frame ensures optimum protection in rough working conditions. The tools required to use the hydraulic terminal devices are safely stored in the integrated storage box.

Ruggedly designed for heavy-duty demolition applications, the EP3 supplies the hand-held demolition tools from Darda with a system pressure of 500 bar. The compact dimensions enable uncomplicated transport to the job site.