VUC-A series DEMOLITION MULTI PROCESSOR
Call for Pricing
Description
With versatile interchangeable jaw and tooth design, VUC-A provides the simple but powerful tool for demolition and recycling contractors.
Unlike conventional shears, VUC-A with Shear jaw provides clean cut to wide plates and beams without jamming.
Replaceable teeth reduce maintenance time and cost.
Dual Cylinder Dual Pin design provides
- Wide opening and tremendous initial crushing force, and optimized angle of attack.
- Asymmetric design and independent cylinder movement minimize the stress to the carrier.
Model
Unit
VUC 152A
VUC 202A
Unit
VUC 152A
VUC 202A
Carrier Weight
M/T
13~20
20~40
M/T
13~20
20~40
Weight with CB Jaw
kg
1,430
2,210
lb
3,150
4,860
Weight with X Jaw
1,380
2,190
3,040
4,820
Weight with S Jaw
1,347
2,010
2,960
4,420
Crusher Jaw [CB Jaw]
Height
mm
1,610
2,180
inch
63
86
Width
1,120
1,440
44
57
Openning
750
955
30
38
Depth
610
820
24
32
Blade Length
140
220
5.5
8.7
Cutting Force [A, Throat]
M/T
(Metric Ton)
526
1,048
lb (X1000)
1,157
2,310
Crushing Force CB Jaw
[B] Middle
142
233
313
514
[C] Tip
82
131
181
289
Shearing Force S Jaw
[B] Apex
243
350
535
772
[C] Tip
104
172
229
380
Rated Pressure
bar
320
psi
4,600
Rated Oil Flow
lpm
210
280
gpm
55
74
Hyd.Rotation
Pressure
bar
210
psi
3,000
Oil Flow
lpm
28~32
32~45
gpm
7~8
8~12
Speed
RPM
10~15
RPM
10~15
Cycle time
Open
sec
1.5
2.5
sec
1.5
2.5
Close
1.4
2.3
1.4
2.3
Specifications subject to change without notice.
- Height Dim: Flat top mounting. Measured jaw fully closed.
- Width Dim: Measured jaw wide open.
- Cutting Force [A]: At rebar blade center
- Cycle time: Measured at rated flow under no load.
With versatile interchangeable jaw and tooth design, VUC-A provides the simple but powerful tool for demolition and recycling contractors.
Unlike conventional shears, VUC-A with Shear jaw provides clean cut to wide plates and beams without jamming.
Replaceable teeth reduce maintenance time and cost.
Dual Cylinder Dual Pin design provides
- Wide opening and tremendous initial crushing force, and optimized angle of attack.
- Asymmetric design and independent cylinder movement minimize the stress to the carrier.
| Model | Unit | VUC 152A | VUC 202A | Unit | VUC 152A | VUC 202A | |
| Carrier Weight | M/T | 13~20 | 20~40 | M/T | 13~20 | 20~40 | |
| Weight with CB Jaw | kg | 1,430 | 2,210 | lb | 3,150 | 4,860 | |
| Weight with X Jaw | 1,380 | 2,190 | 3,040 | 4,820 | |||
| Weight with S Jaw | 1,347 | 2,010 | 2,960 | 4,420 | |||
| Crusher Jaw [CB Jaw] | Height | mm | 1,610 | 2,180 | inch | 63 | 86 |
| Width | 1,120 | 1,440 | 44 | 57 | |||
| Openning | 750 | 955 | 30 | 38 | |||
| Depth | 610 | 820 | 24 | 32 | |||
| Blade Length | 140 | 220 | 5.5 | 8.7 | |||
| Cutting Force [A, Throat] | M/T (Metric Ton) | 526 | 1,048 | lb (X1000) | 1,157 | 2,310 | |
| Crushing Force CB Jaw | [B] Middle | 142 | 233 | 313 | 514 | ||
| [C] Tip | 82 | 131 | 181 | 289 | |||
| Shearing Force S Jaw | [B] Apex | 243 | 350 | 535 | 772 | ||
| [C] Tip | 104 | 172 | 229 | 380 | |||
| Rated Pressure | bar | 320 | psi | 4,600 | |||
| Rated Oil Flow | lpm | 210 | 280 | gpm | 55 | 74 | |
| Hyd.Rotation | Pressure | bar | 210 | psi | 3,000 | ||
| Oil Flow | lpm | 28~32 | 32~45 | gpm | 7~8 | 8~12 | |
| Speed | RPM | 10~15 | RPM | 10~15 | |||
| Cycle time | Open | sec | 1.5 | 2.5 | sec | 1.5 | 2.5 |
| Close | 1.4 | 2.3 | 1.4 | 2.3 | |||
Specifications subject to change without notice.
- Height Dim: Flat top mounting. Measured jaw fully closed.
- Width Dim: Measured jaw wide open.
- Cutting Force [A]: At rebar blade center
- Cycle time: Measured at rated flow under no load.