VRC series RAIL CUTTER
Call for Pricing
Description
- Optimized rail cutting angle and continuous force through the cycle.
- 360 Continuous Rotator with Dual Relief Valve.
- Speed valve reduces cycle time.
- Made of abrasive resistant steel for longer life.
- Asymmetric design and independent cylinders movement minimize the stress to the carrier.
Model
Unit
VRC202
Unit
VRC202
Carrier Weight
M,T
20 ~ 45
M,T
20 ~ 45
Weight with Rail
Cutter Jaw
kg
2265
lb
4,995
Jaw
Dim
Opening
mm
170
inch
6.7
Depth
160
6.3
Cuting
Force
[A] Throat
M,T (Metric Ton)
756
lb
(X1000)
1660
[B] Middle
530
780
Piercing Force [C
Tip]
393
410
Rated Pressure
bar
320
psi
4,600
Rated Oil Flow
lpm
230
gpm
61
Overall
Dim
Height
mm
1,750
inch
69
Width
1,250
49
Hyd. Rotation
Pressure
bar
210
psi
3000
Oil Flow
lpm
32~45
gpm
8 ~ 12
Speed
RIM
10~15
RIM
10~15
Cycle time
Open
sec
1.9
sec
1.9
Close (S)
1.8
1.8
Specifications subject to change without notice.
- R model comes with continuous 360 degrees hydraulic rotation is standard.
- Height Dim: Flat top mounting
- Width Dim: Measured jaw wide open.
- Cutting Force at Middle [B]: Cutting blade center
- Cycle time: Measured at rated flow under no load.
- Optimized rail cutting angle and continuous force through the cycle.
- 360 Continuous Rotator with Dual Relief Valve.
- Speed valve reduces cycle time.
- Made of abrasive resistant steel for longer life.
- Asymmetric design and independent cylinders movement minimize the stress to the carrier.
| Model | Unit | VRC202 | Unit | VRC202 | |
| Carrier Weight | M,T | 20 ~ 45 | M,T | 20 ~ 45 | |
| Weight with Rail Cutter Jaw | kg | 2265 | lb | 4,995 | |
| Jaw Dim | Opening | mm | 170 | inch | 6.7 |
| Depth | 160 | 6.3 | |||
| Cuting Force | [A] Throat | M,T (Metric Ton) | 756 | lb (X1000) | 1660 |
| [B] Middle | 530 | 780 | |||
| Piercing Force [C Tip] | 393 | 410 | |||
| Rated Pressure | bar | 320 | psi | 4,600 | |
| Rated Oil Flow | lpm | 230 | gpm | 61 | |
| Overall Dim | Height | mm | 1,750 | inch | 69 |
| Width | 1,250 | 49 | |||
| Hyd. Rotation | Pressure | bar | 210 | psi | 3000 |
| Oil Flow | lpm | 32~45 | gpm | 8 ~ 12 | |
| Speed | RIM | 10~15 | RIM | 10~15 | |
| Cycle time | Open | sec | 1.9 | sec | 1.9 |
| Close (S) | 1.8 | 1.8 | |||
Specifications subject to change without notice.
- R model comes with continuous 360 degrees hydraulic rotation is standard.
- Height Dim: Flat top mounting
- Width Dim: Measured jaw wide open.
- Cutting Force at Middle [B]: Cutting blade center
- Cycle time: Measured at rated flow under no load.